22
'10
Written on
SOURIAU – SUNBANK Connection Technologies
22
'10
Written on
RITTAL
"Rittal – the System" offers planning, equipment and service for data centres from one source
Data centres are complex projects. Secure, available and energy-efficient IT services are only possible with a seamless interaction of software, hardware and IT infrastructure. "Rittal – the System" is the new plat-form the data centre specialist is presenting in a bid to shorten the path to turnkey data centres greatly. Just like a set of building bricks, individually matched components can be fitted together and combined with consulting and services.
20
'10
Written on
NORD Drivesystems
Gear units for great tasks: NORD drive solutions from 20,000 to 200,000 Nm
20
'10
Written on
STAHL
Triple protection: UPS system solution for an offshore platform
An Uninterruptible Power Supply is mandatory on oil rigs: for safety reasons, the signal lighting must be operational at all times. Tasked with designing a UPS solution for an offshore rig off the African coast, R. STAHL was faced with three challenges. The UPS system not only required protective measures against explosive atmospheres, but also had to be adapted to the great heat and maritime climate at the rig's location.
17
'10
Written on
NORD Drivesystems
High-performance drives for port facilities
Facing a ceaseless stream of multi-ton loads, drives in portside gantry cranes are under constant pressure to perform. Users need and demand reliable solutions that deliver excellent dynamics, positioning precision, and cost efficiency in equal measure. Hoist and trolley drives used in shipyard or container terminal cranes therefore require specialized mechanics and electronics suitable for this demanding application area.
03
'10
Written on
Weidmüller
Weidmüller's "ACT20M"
New product series packaged in a 6-mm module width for converting and isolating analogue signals. High levels of functionality with minimum space requirements. ACT20M product series with Ex Zone 2 approval.
01
'10
Written on
BALLUFF
IO-Link Analog Plug: convert analog signals into IO-Link signals
Until now it has been costly to connect and incorporate analog input/output signals, even though they generally only make up less than 10% of the signals used in a system. The reasons include the use of shielded cable on the installation side and expensive multi-channel input modules on the controller side. The new IO-Link Analog Plugs from Balluff with their high resolution of 14 bits provide the solution. They are the ideal choice for systems with limited instances of analog signals.
30
'10
Written on
Westermo Teleindustri AB
Emergency phone system for Europe’s largest suspension bridge
The Great Belt Fixed Link connects half of the Danish population with the rest of the European road and rail network. Approximately 11 million vehicles and 8,3 million train passengers cross the bridge each year. A new 2 x 1 Gbit/s fibre backbone network was recently installed to provide for all the data transmission from the weather stations and CCTV, and a new emergency phone system using IP telephony technology was installed. To provide the data communication between the telephone and the fibre backbone, the company A/S Storebælt has chosen the robust Westermo Wolverine Ethernet Extender.
30
'10
Written on
Weidmüller
Weidmüller's "PRO-H" switch-mode power supplies
New family of EX approved power supply units designed to meet the needs of the processing industry and demanding automation technology solutions. Single-phase, slimline switch-mode power supplies save space when populating electrical cabinets. A truly international solution thanks to wide-range input and the corresponding approvals.
29
'10
Written on
Steute
